Capacitive Insect Sensing Under a Single Dual-Arc Geometry: A Laboratory Benchmark of Four CDC Architectures
Journal
Sensors (Basel, Switzerland)
Journal Volume
26
Journal Issue
11
Start Page
3306
ISSN
1424-8220
Date Issued
2026-05-22
Author(s)
Abstract
Capacitive sensing offers a low-power, non-optical route for automated insect monitoring, but architecture-level benchmarking under shared geometry remains limited. Rather than presenting a general framework, this study proposed a configuration-specific laboratory benchmark comparing four sigma-delta and charge-transfers in a 6 mm dual-arc conduit at 25 °C, targeting six adult terrestrial arthropod species spanning a 25-fold range of the body cross-sectional area. Static measurements showed a strong linear relationship between ΔC_static and body cross-sectional area (17.96 fF/mm, r = 0.995), supporting first-pass conduit sizing and detectability screening. In contrast, transit amplitudes were not monotonic with body size because posture, motion, and gap occupancy affected waveform shape. Under chamber conditions, static sensitivity degraded by less than 3.2% across all architectures from RH 40% to 80%. However, under the deployment-oriented noise model, SNR_FR degradation was substantially higher for charge-transfer devices (64.8-66.8%) than for Σ-Δ devices (≤35.5%), because the composite noise floor amplifies the effect of humidity-induced baseline drift. These results generated a conduit-specific reference dataset for preliminary capacitance-to-digital converter (CDC) selection within the tested 6 mm dual-arc geometry. In addition, the experimental validation focused on laboratory baseline noise characterization, long-term drift, and trap-integrated testing in temperature-controlled environments and natural-locomotion trials, providing critical information on configuration-specific architectures and body-size-scaling reference. This study serves as an initial step toward real-world capacitive insect sensing. Future studies will investigate additional conduit geometries and insect species to improve the robustness of the proposed framework.
Subjects
CDC architecture comparison
adult terrestrial insect monitoring
body-size scaling
capacitive sensing
humidity robustness
single-geometry laboratory benchmark
Publisher
MDPI
Type
journal article